Over the past decade, ARM-based processors have dominated the mobile device market by offering lower cost, excellent wattage performance, efficiency, and the ability to control both hardware and software.
The existing server industry is dominated by Intel and AMD with the x86 architecture due to the ecosystem, hardware and software compatibility.
On the other hand, the demand for Arm-based servers is expected to increase in the coming years for several reasons:
SolidRun's 1U Dual Sled Server is designed to reduce rack footprint by integrating two computer units (HoneyComb LX2) into a 1U chassis.
HoneyComb LX2 is a server based on 16-core Cortex A72, which runs up to 2.2 GHz and consumes about 40W. It is packaged in a Mini-ITX form factor and offers extended connectivity, such as 10 x Gbps SFP + ports for SDN (up to 40GbE), USB 3.0, open PCIe slot for GPUs, as well as extended connectivity, 16 cores and up to 64 GB of memory
You can install and run any distribution based on Linux or BSD, VMWare ESXi on Arm or Windows 10 Enterprise on Arm.
Support:
- openSUSE Leap 15.2
- Fedora
- FreeBSD (under development)
- NetBSD (under development)
- OpenBSD (under development)
Form factor | 1U 19 ”rack mounted chassis with Mini-ITX double breasts |
I / Os | 3 x USB 3.0 3 x USB 2.0 |
networking | 4 SFP + ports (10GbE each) 1 x 1GbE copper (RJ45) |
Processor | 1 x NXP Layerscape LX2160A 16-core Arm Cortex A72 up to 2GHz |
Memory and storage | Up to 64 GB DDR4 DIMM 64 GB eMMC MicroSD 4 x SATA 3.0 |
miscellaneous | USB to STM32 for remote management |
Development and troubleshooting interfaces | Micro USB JTAG |
I / Os expansion card | 1 x PCIe x8 Gen 3.0, open slot (can support x16) 1 x M.2 for NVMe SSD |
Temperature | Commercial: 0 ° C to 40 ° C |
Power | 1 x 300W PSU 2 x PWM 40mm x 40mm fans |
Each kit contains | 1RU Dual Mini-ITX each 1RU chassis contains 2 sleigh chassis, each sleigh having: - with 1 x HoneyComb LX2 - with / 1 x 300W PSU - with / 2 PWM fans 40mm x 40mm - with SATA3 cables - with / Y cable for PWM fans - with 2.5 ″ ”drive tray and 3.5 ″” drive tray with rubber dampers * * DDR, SSDs, SATA HDDs are not included by default. |