To get started, make sure that the Ndiswrapper driver works normally, without encryption. Create the /etc/wpa_supplicant.conf file, and insert the following lines into it by changing the ssid and psk values.

ctrl_interface=/var/run/wpa_supplicant network={ ssid="SSID-ulTauWIFI" psk="ParolaTaWiFi" key_mgmt=WPA-PSK proto=WPA pairwise=TKIP }

Test the connection. Make sure your router transmits its SSID.

sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -dd

If WPA works to load it with the system run

gksudo gedit /etc/network/interfaces

Change the wlan0 section With the following lines:

If you have a static address:

auto wlan0 iface wlan0 inet static address 192.168.1.20 netmask 255.255.255.0 gateway 192.168.1.1 pre-up wpa_supplicant -Bw -Dwext -iwlan0 -c/etc/wpa_supplicant.conf post-down killall -q wpa_supplicant

or the following lines if you get an address via DHCP.

auto wlan0 iface wlan0 inet dhcp pre-up wpa_supplicant -Bw -Dwext -iwlan0 -c/etc/wpa_supplicant.conf post-down killall -q wpa_supplicant

Restart the system

Cititi mai multe stiri/noutati despre Ubuntu aici ...

  • What is your reaction?
  • powered by Verysign
  • like gnulinux.ro
    Like
  • unmoved gnulinux.ro
    Unmoved
  • amused gnulinux.ro
    Amused
  • excited gnulinux.ro
    Excited
  • angry gnulinux.ro
    Angry
  • sad gnulinux.ro
    Sad
TENDINTA  |  NomadBSD 130R-20210508 - change the versioning scheme
FlorinM                   gnulinux.ro
FlorinM
Utilizator Linux - Solus OS, pasionat de calatorii.
2317 articole



  • Comment
  • powered by Verysign

Nici un comentariu inca. Fii primul!